BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

classic Classic list List threaded Threaded
21 messages Options
12
Reply | Threaded
Open this post in threaded view
|

BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Paul Cizmas
Hello:

I am new to BIND and I am trying to install version 9.16.13 on a Mac OS X 10.13.6.

I downloaded version 9.16.13 and, following the suggestions from https://krypted.com/mac-os-x/dns-install-bind-macos/, I am trying to configure using

./configure --enable-symtable=none --infodir="/usr/share/info" --sysconfdir="/etc" --localstatedir="/var" --enable-atomic="no" --with-gssapi=yes --with-libxml2=no

This fails because of libuv

checking for pthread_set_name_np... no
checking for pthread_np.h... no
checking for libuv... checking for libuv >= 1.0.0... no
configure: error: libuv not found

I have libuv installed, however.  It is version 1.41.0.

I would appreciate any suggestions on how to fix this.

Thank you,
Paul



_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Mark Andrews
libuv discovery requires pkg-config to be found.  macports/homebrew installs of libuv should register libuv correctly.


> On 26 Mar 2021, at 11:50, Paul Cizmas <[hidden email]> wrote:
>
> Hello:
>
> I am new to BIND and I am trying to install version 9.16.13 on a Mac OS X 10.13.6.
>
> I downloaded version 9.16.13 and, following the suggestions from https://krypted.com/mac-os-x/dns-install-bind-macos/, I am trying to configure using
>
> ./configure --enable-symtable=none --infodir="/usr/share/info" --sysconfdir="/etc" --localstatedir="/var" --enable-atomic="no" --with-gssapi=yes --with-libxml2=no
>
> This fails because of libuv
>
> checking for pthread_set_name_np... no
> checking for pthread_np.h... no
> checking for libuv... checking for libuv >= 1.0.0... no
> configure: error: libuv not found
>
> I have libuv installed, however.  It is version 1.41.0.
>
> I would appreciate any suggestions on how to fix this.
>
> Thank you,
> Paul
>
>
> _______________________________________________
> Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list
>
> ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.
>
>
> bind-users mailing list
> [hidden email]
> https://lists.isc.org/mailman/listinfo/bind-users

--
Mark Andrews, ISC
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742              INTERNET: [hidden email]

_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Paul Cizmas
I did use homebrew.  It installed libuv 1.41.0 without any complaints.  Is there something I could do to manually point BIND to libuv?

Thank you,
Paul


> On Mar 25, 2021, at 10:12 PM, Mark Andrews <[hidden email]> wrote:
>
> libuv discovery requires pkg-config to be found.  macports/homebrew installs of libuv should register libuv correctly.
>
>
>> On 26 Mar 2021, at 11:50, Paul Cizmas <[hidden email]> wrote:
>>
>> Hello:
>>
>> I am new to BIND and I am trying to install version 9.16.13 on a Mac OS X 10.13.6.
>>
>> I downloaded version 9.16.13 and, following the suggestions from https://urldefense.com/v3/__https://krypted.com/mac-os-x/dns-install-bind-macos/__;!!KwNVnqRv!T2YrsudDg_5xUn4JVLDSFDP1B5SWepbwzT9ay0JLZrWIwZ5iSfh2BCY7WA-Zw5Q$ , I am trying to configure using
>>
>> ./configure --enable-symtable=none --infodir="/usr/share/info" --sysconfdir="/etc" --localstatedir="/var" --enable-atomic="no" --with-gssapi=yes --with-libxml2=no
>>
>> This fails because of libuv
>>
>> checking for pthread_set_name_np... no
>> checking for pthread_np.h... no
>> checking for libuv... checking for libuv >= 1.0.0... no
>> configure: error: libuv not found
>>
>> I have libuv installed, however.  It is version 1.41.0.
>>
>> I would appreciate any suggestions on how to fix this.
>>
>> Thank you,
>> Paul
>>
>>
>> _______________________________________________
>> Please visit https://urldefense.com/v3/__https://lists.isc.org/mailman/listinfo/bind-users__;!!KwNVnqRv!T2YrsudDg_5xUn4JVLDSFDP1B5SWepbwzT9ay0JLZrWIwZ5iSfh2BCY7SJu0lnU$  to unsubscribe from this list
>>
>> ISC funds the development of this software with paid support subscriptions. Contact us at https://urldefense.com/v3/__https://www.isc.org/contact/__;!!KwNVnqRv!T2YrsudDg_5xUn4JVLDSFDP1B5SWepbwzT9ay0JLZrWIwZ5iSfh2BCY7yy0Nyq0$  for more information.
>>
>>
>> bind-users mailing list
>> [hidden email]
>> https://urldefense.com/v3/__https://lists.isc.org/mailman/listinfo/bind-users__;!!KwNVnqRv!T2YrsudDg_5xUn4JVLDSFDP1B5SWepbwzT9ay0JLZrWIwZ5iSfh2BCY7SJu0lnU$ 
>
> --
> Mark Andrews, ISC
> 1 Seymour St., Dundas Valley, NSW 2117, Australia
> PHONE: +61 2 9871 4742              INTERNET: [hidden email]
>

_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Larry Stone
In reply to this post by Paul Cizmas
I’ve been building BIND on MacOS for years (currently on Catalina but has worked on almost the entire Mac OS X series.

>
> On Mar 25, 2021, at 7:50 PM, Paul Cizmas <[hidden email]> wrote:
>
> I am new to BIND and I am trying to install version 9.16.13 on a Mac OS X 10.13.6.
>
> I downloaded version 9.16.13 and, following the suggestions from https://krypted.com/mac-os-x/dns-install-bind-macos/, I am trying to configure using
>
> ./configure --enable-symtable=none --infodir="/usr/share/info" --sysconfdir="/etc" --localstatedir="/var" --enable-atomic="no" --with-gssapi=yes --with-libxml2=no
>

I don’t know that site and I don’t know what most of the those options do. A simple ./configure has almost always worked for me.

> This fails because of libuv
>
> checking for pthread_set_name_np... no
> checking for pthread_np.h... no
> checking for libuv... checking for libuv >= 1.0.0... no
> configure: error: libuv not found
>
> I have libuv installed, however.  It is version 1.41.0.
>

Is libuv where the BIND configure is looking for it? My libuv files are in /usr/local/lib. I have libuv 1.35 (doubt the version is making a difference) and it looks like I installed it a year ago.

Are you using something like homebrew or macports? I don’t as I was already too established doing everything from scratch when I learned about them. But I believe at least one of them if not both use their own set of directories so something built with one of them will not be found by something coming from the other or done from scratch. Those instructions from krypted.com appear to be doing a “from scratch” version so if you installed libuv with homebrew or macports, I doubt the krypted.com instructions will find it.


--
Larry Stone
[hidden email]
_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Eddy Hahn
I do not use either of them because I cannot trust them. I build all dependencies from scratch so I do not have to depend on others- breaking things from one version to the next.
Also I do not like to use the old libs shipped with the OS or install 3rd party into the OS directories.

Cheers,

Eddy

> On Mar 25, 2021, at 8:59 PM, Larry Stone <[hidden email]> wrote:
>
> I’ve been building BIND on MacOS for years (currently on Catalina but has worked on almost the entire Mac OS X series.
>
>>
>> On Mar 25, 2021, at 7:50 PM, Paul Cizmas <[hidden email]> wrote:
>>
>> I am new to BIND and I am trying to install version 9.16.13 on a Mac OS X 10.13.6.
>>
>> I downloaded version 9.16.13 and, following the suggestions from https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fkrypted.com%2Fmac-os-x%2Fdns-install-bind-macos%2F&amp;data=04%7C01%7C%7C531de9ed26704038675308d8f00b8f48%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637523279725421196%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=wN7nldydRlRxmZrp8rWOtLQQN21cSXnc5x5Ym6oZ5Hs%3D&amp;reserved=0, I am trying to configure using
>>
>> ./configure --enable-symtable=none --infodir="/usr/share/info" --sysconfdir="/etc" --localstatedir="/var" --enable-atomic="no" --with-gssapi=yes --with-libxml2=no
>>
>
> I don’t know that site and I don’t know what most of the those options do. A simple ./configure has almost always worked for me.
>
>> This fails because of libuv
>>
>> checking for pthread_set_name_np... no
>> checking for pthread_np.h... no
>> checking for libuv... checking for libuv >= 1.0.0... no
>> configure: error: libuv not found
>>
>> I have libuv installed, however.  It is version 1.41.0.
>>
>
> Is libuv where the BIND configure is looking for it? My libuv files are in /usr/local/lib. I have libuv 1.35 (doubt the version is making a difference) and it looks like I installed it a year ago.
>
> Are you using something like homebrew or macports? I don’t as I was already too established doing everything from scratch when I learned about them. But I believe at least one of them if not both use their own set of directories so something built with one of them will not be found by something coming from the other or done from scratch. Those instructions from krypted.com appear to be doing a “from scratch” version so if you installed libuv with homebrew or macports, I doubt the krypted.com instructions will find it.
>
>
> --
> Larry Stone
> [hidden email]
> _______________________________________________
> Please visit https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.isc.org%2Fmailman%2Flistinfo%2Fbind-users&amp;data=04%7C01%7C%7C531de9ed26704038675308d8f00b8f48%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637523279725421196%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=PGVNS%2BEb%2B7YohVLKtzRz30%2F6ls1kvh8ilPQ3Cv57k9Q%3D&amp;reserved=0 to unsubscribe from this list
>
> ISC funds the development of this software with paid support subscriptions. Contact us at https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.isc.org%2Fcontact%2F&amp;data=04%7C01%7C%7C531de9ed26704038675308d8f00b8f48%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637523279725421196%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=jv%2FCZcukHxDGGXORN3OYGMYp6Utpk%2F%2BYK4ka0sTuHqI%3D&amp;reserved=0 for more information.
>
>
> bind-users mailing list
> [hidden email]
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.isc.org%2Fmailman%2Flistinfo%2Fbind-users&amp;data=04%7C01%7C%7C531de9ed26704038675308d8f00b8f48%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637523279725421196%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=PGVNS%2BEb%2B7YohVLKtzRz30%2F6ls1kvh8ilPQ3Cv57k9Q%3D&amp;reserved=0
_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Paul Cizmas
Eddy, I fully agree with you. I wish I could do it.  Unfortunately I failed to install libuv from scratch and I took a shortcut by using homebrew (and now I am paying for it, as I should).

Paul

> On Mar 25, 2021, at 11:05 PM, Eddy Hahn <[hidden email]> wrote:
>
> I do not use either of them because I cannot trust them. I build all dependencies from scratch so I do not have to depend on others- breaking things from one version to the next.
> Also I do not like to use the old libs shipped with the OS or install 3rd party into the OS directories.
>
> Cheers,
>
> Eddy
>
>> On Mar 25, 2021, at 8:59 PM, Larry Stone <[hidden email]> wrote:
>>
>> I’ve been building BIND on MacOS for years (currently on Catalina but has worked on almost the entire Mac OS X series.
>>
>>>
>>> On Mar 25, 2021, at 7:50 PM, Paul Cizmas <[hidden email]> wrote:
>>>
>>> I am new to BIND and I am trying to install version 9.16.13 on a Mac OS X 10.13.6.
>>>
>>> I downloaded version 9.16.13 and, following the suggestions from https://urldefense.com/v3/__https://na01.safelinks.protection.outlook.com/?url=https*3A*2F*2Fkrypted.com*2Fmac-os-x*2Fdns-install-bind-macos*2F&amp;data=04*7C01*7C*7C531de9ed26704038675308d8f00b8f48*7C84df9e7fe9f640afb435aaaaaaaaaaaa*7C1*7C0*7C637523279725421196*7CUnknown*7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0*3D*7C1000&amp;sdata=wN7nldydRlRxmZrp8rWOtLQQN21cSXnc5x5Ym6oZ5Hs*3D&amp;reserved=0__;JSUlJSUlJSUlJSUlJSUlJSUl!!KwNVnqRv!SeCbRCtQQ1-pyWorY4eIWCDOgRROjaa-_OzHQBubG79Rq8hsFwKYhcS04iT0kFM$ , I am trying to configure using
>>>
>>> ./configure --enable-symtable=none --infodir="/usr/share/info" --sysconfdir="/etc" --localstatedir="/var" --enable-atomic="no" --with-gssapi=yes --with-libxml2=no
>>>
>>
>> I don’t know that site and I don’t know what most of the those options do. A simple ./configure has almost always worked for me.
>>
>>> This fails because of libuv
>>>
>>> checking for pthread_set_name_np... no
>>> checking for pthread_np.h... no
>>> checking for libuv... checking for libuv >= 1.0.0... no
>>> configure: error: libuv not found
>>>
>>> I have libuv installed, however.  It is version 1.41.0.
>>>
>>
>> Is libuv where the BIND configure is looking for it? My libuv files are in /usr/local/lib. I have libuv 1.35 (doubt the version is making a difference) and it looks like I installed it a year ago.
>>
>> Are you using something like homebrew or macports? I don’t as I was already too established doing everything from scratch when I learned about them. But I believe at least one of them if not both use their own set of directories so something built with one of them will not be found by something coming from the other or done from scratch. Those instructions from krypted.com appear to be doing a “from scratch” version so if you installed libuv with homebrew or macports, I doubt the krypted.com instructions will find it.
>>
>>
>> --
>> Larry Stone
>> [hidden email]
>> _______________________________________________
>> Please visit https://urldefense.com/v3/__https://na01.safelinks.protection.outlook.com/?url=https*3A*2F*2Flists.isc.org*2Fmailman*2Flistinfo*2Fbind-users&amp;data=04*7C01*7C*7C531de9ed26704038675308d8f00b8f48*7C84df9e7fe9f640afb435aaaaaaaaaaaa*7C1*7C0*7C637523279725421196*7CUnknown*7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0*3D*7C1000&amp;sdata=PGVNS*2BEb*2B7YohVLKtzRz30*2F6ls1kvh8ilPQ3Cv57k9Q*3D&amp;reserved=0__;JSUlJSUlJSUlJSUlJSUlJSUlJSUl!!KwNVnqRv!SeCbRCtQQ1-pyWorY4eIWCDOgRROjaa-_OzHQBubG79Rq8hsFwKYhcS0u5MpoDY$  to unsubscribe from this list
>>
>> ISC funds the development of this software with paid support subscriptions. Contact us at https://urldefense.com/v3/__https://na01.safelinks.protection.outlook.com/?url=https*3A*2F*2Fwww.isc.org*2Fcontact*2F&amp;data=04*7C01*7C*7C531de9ed26704038675308d8f00b8f48*7C84df9e7fe9f640afb435aaaaaaaaaaaa*7C1*7C0*7C637523279725421196*7CUnknown*7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0*3D*7C1000&amp;sdata=jv*2FCZcukHxDGGXORN3OYGMYp6Utpk*2F*2BYK4ka0sTuHqI*3D&amp;reserved=0__;JSUlJSUlJSUlJSUlJSUlJSUlJSU!!KwNVnqRv!SeCbRCtQQ1-pyWorY4eIWCDOgRROjaa-_OzHQBubG79Rq8hsFwKYhcS08K2yo00$  for more information.
>>
>>
>> bind-users mailing list
>> [hidden email]
>> https://urldefense.com/v3/__https://na01.safelinks.protection.outlook.com/?url=https*3A*2F*2Flists.isc.org*2Fmailman*2Flistinfo*2Fbind-users&amp;data=04*7C01*7C*7C531de9ed26704038675308d8f00b8f48*7C84df9e7fe9f640afb435aaaaaaaaaaaa*7C1*7C0*7C637523279725421196*7CUnknown*7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0*3D*7C1000&amp;sdata=PGVNS*2BEb*2B7YohVLKtzRz30*2F6ls1kvh8ilPQ3Cv57k9Q*3D&amp;reserved=0__;JSUlJSUlJSUlJSUlJSUlJSUlJSUl!!KwNVnqRv!SeCbRCtQQ1-pyWorY4eIWCDOgRROjaa-_OzHQBubG79Rq8hsFwKYhcS0u5MpoDY$ 
> _______________________________________________
> Please visit https://urldefense.com/v3/__https://lists.isc.org/mailman/listinfo/bind-users__;!!KwNVnqRv!SeCbRCtQQ1-pyWorY4eIWCDOgRROjaa-_OzHQBubG79Rq8hsFwKYhcS0LBf-oqM$  to unsubscribe from this list
>
> ISC funds the development of this software with paid support subscriptions. Contact us at https://urldefense.com/v3/__https://www.isc.org/contact/__;!!KwNVnqRv!SeCbRCtQQ1-pyWorY4eIWCDOgRROjaa-_OzHQBubG79Rq8hsFwKYhcS0N-KYHZw$  for more information.
>
>
> bind-users mailing list
> [hidden email]
> https://urldefense.com/v3/__https://lists.isc.org/mailman/listinfo/bind-users__;!!KwNVnqRv!SeCbRCtQQ1-pyWorY4eIWCDOgRROjaa-_OzHQBubG79Rq8hsFwKYhcS0LBf-oqM$ 

_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Paul Cizmas
In reply to this post by Larry Stone
I tried now using libuv 1.35 and it failed again during make at

  CC       src/unix/libuv_la-darwin-proctitle.lo
In file included from /System/Library/Frameworks/Security.framework/Headers/AuthSession.h:32:0,
                 from /System/Library/Frameworks/Security.framework/Headers/Security.h:43,
                 from /System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framework/Headers/CSIdentity.h:43,
                 from /System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framework/Headers/OSServices.h:27,
                 from /System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.framework/Headers/IconsCore.h:23,
                 from /System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.framework/Headers/LaunchServices.h:22,
                 from /System/Library/Frameworks/CoreServices.framework/Headers/CoreServices.h:39,
                 from /System/Library/Frameworks/ApplicationServices.framework/Headers/ApplicationServices.h:23,
                 from src/unix/darwin-proctitle.c:34:
/System/Library/Frameworks/Security.framework/Headers/Authorization.h:193:7: error: variably modified ‘bytes’ at file scope
  char bytes[kAuthorizationExternalFormLength];
       ^~~~~
In file included from /System/Library/Frameworks/CoreGraphics.framework/Headers/CGContext.h:18:0,
                 from /System/Library/Frameworks/CoreGraphics.framework/Headers/CGBitmapContext.h:9,
                 from /System/Library/Frameworks/CoreGraphics.framework/Headers/CoreGraphics.h:11,
                 from /System/Library/Frameworks/ApplicationServices.framework/Headers/ApplicationServices.h:35,
                 from src/unix/darwin-proctitle.c:34:
/System/Library/Frameworks/CoreGraphics.framework/Headers/CGFont.h:53:40: error: initializer element is not constant
 static const CGFontIndex kCGGlyphMax = kCGFontIndexMax;
                                        ^~~~~~~~~~~~~~~
In file included from /System/Library/Frameworks/CoreGraphics.framework/Headers/CGContext.h:21:0,
                 from /System/Library/Frameworks/CoreGraphics.framework/Headers/CGBitmapContext.h:9,
                 from /System/Library/Frameworks/CoreGraphics.framework/Headers/CoreGraphics.h:11,
                 from /System/Library/Frameworks/ApplicationServices.framework/Headers/ApplicationServices.h:35,
                 from src/unix/darwin-proctitle.c:34:
/System/Library/Frameworks/CoreGraphics.framework/Headers/CGPath.h:391:15: error: expected identifier or ‘(’ before ‘^’ token
 typedef void (^CGPathApplyBlock)(const CGPathElement * element);
               ^
/System/Library/Frameworks/CoreGraphics.framework/Headers/CGPath.h:393:53: error: unknown type name ‘CGPathApplyBlock
 CG_EXTERN void CGPathApplyWithBlock(CGPathRef path, CGPathApplyBlock CF_NOESCAPE block)
                                                     ^~~~~~~~~~~~~~~~
make: *** [Makefile:2610: src/unix/libuv_la-darwin-proctitle.lo] Error 1


On Mar 25, 2021, at 10:58 PM, Larry Stone <[hidden email]> wrote:

I’ve been building BIND on MacOS for years (currently on Catalina but has worked on almost the entire Mac OS X series.


On Mar 25, 2021, at 7:50 PM, Paul Cizmas <[hidden email]> wrote:

I am new to BIND and I am trying to install version 9.16.13 on a Mac OS X 10.13.6.

I downloaded version 9.16.13 and, following the suggestions from https://urldefense.com/v3/__https://krypted.com/mac-os-x/dns-install-bind-macos/__;!!KwNVnqRv!SgN3gnzEKHjO4-cmHIFW1vcyx5KWnm1ii44xUN8Cv7V0BQRszE6xAdIje1bTo8s$ , I am trying to configure using

./configure --enable-symtable=none --infodir="/usr/share/info" --sysconfdir="/etc" --localstatedir="/var" --enable-atomic="no" --with-gssapi=yes --with-libxml2=no


I don’t know that site and I don’t know what most of the those options do. A simple ./configure has almost always worked for me.

This fails because of libuv

checking for pthread_set_name_np... no
checking for pthread_np.h... no
checking for libuv... checking for libuv >= 1.0.0... no
configure: error: libuv not found

I have libuv installed, however.  It is version 1.41.0.


Is libuv where the BIND configure is looking for it? My libuv files are in /usr/local/lib. I have libuv 1.35 (doubt the version is making a difference) and it looks like I installed it a year ago.

Are you using something like homebrew or macports? I don’t as I was already too established doing everything from scratch when I learned about them. But I believe at least one of them if not both use their own set of directories so something built with one of them will not be found by something coming from the other or done from scratch. Those instructions from krypted.com appear to be doing a “from scratch” version so if you installed libuv with homebrew or macports, I doubt the krypted.com instructions will find it.


--
Larry Stone
[hidden email]
_______________________________________________
Please visit https://urldefense.com/v3/__https://lists.isc.org/mailman/listinfo/bind-users__;!!KwNVnqRv!SgN3gnzEKHjO4-cmHIFW1vcyx5KWnm1ii44xUN8Cv7V0BQRszE6xAdIj1c28efo$  to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://urldefense.com/v3/__https://www.isc.org/contact/__;!!KwNVnqRv!SgN3gnzEKHjO4-cmHIFW1vcyx5KWnm1ii44xUN8Cv7V0BQRszE6xAdIj1ZDKZjU$  for more information.


bind-users mailing list
[hidden email]
https://urldefense.com/v3/__https://lists.isc.org/mailman/listinfo/bind-users__;!!KwNVnqRv!SgN3gnzEKHjO4-cmHIFW1vcyx5KWnm1ii44xUN8Cv7V0BQRszE6xAdIj1c28efo$


_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Ondřej Surý
In reply to this post by Paul Cizmas
Paul,

why don’t you just install BIND 9 from Homebrew?

Ondřej
--
Ondřej Surý — ISC (He/Him)

My working hours and your working hours may be different. Please do not feel obligated to reply outside your normal working hours.

On 26. 3. 2021, at 1:50, Paul Cizmas <[hidden email]> wrote:

Hello:

I am new to BIND and I am trying to install version 9.16.13 on a Mac OS X 10.13.6.

I downloaded version 9.16.13 and, following the suggestions from https://krypted.com/mac-os-x/dns-install-bind-macos/, I am trying to configure using

./configure --enable-symtable=none --infodir="/usr/share/info" --sysconfdir="/etc" --localstatedir="/var" --enable-atomic="no" --with-gssapi=yes --with-libxml2=no

This fails because of libuv

checking for pthread_set_name_np... no
checking for pthread_np.h... no
checking for libuv... checking for libuv >= 1.0.0... no
configure: error: libuv not found

I have libuv installed, however.  It is version 1.41.0.

I would appreciate any suggestions on how to fix this.

Thank you,
Paul


_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users

_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Larry Stone
In reply to this post by Paul Cizmas



> On Mar 26, 2021, at 12:16 AM, Paul Cizmas <[hidden email]> wrote:
>
> I tried now using libuv 1.35 and it failed again during make at

Is this during the build of BIND or libuv? Looks like libuv.

If it’s during the build of libuv, have you also installed its dependencies? From my notes from when I first built BIND 9.16.x, "Starting with 9.16, needs libuv which in turn needs libtools, automake, and autoconf. After installing libtools, rename /usr/local/lib/libtool and libtoolize to glibtool and glibtoolize” (whatever led me to needing to rename those files is not in my notes). I also found I needed to update Xcode but that may have been for a separate issue.

But I agree with Ondřej, having already installed libuv via Homebrew, why are you not using Homebrew for BIND?

--
Larry Stone
[hidden email]


_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Paul Cizmas
In reply to this post by Ondřej Surý
Ondrej:

I did not think of doing it.  Let me try.  Thank you for your suggestion!

Paul

On Mar 26, 2021, at 2:04 AM, Ondřej Surý <[hidden email]> wrote:

Paul,

why don’t you just install BIND 9 from Homebrew?

Ondřej
--
Ondřej Surý — ISC (He/Him)

My working hours and your working hours may be different. Please do not feel obligated to reply outside your normal working hours.

On 26. 3. 2021, at 1:50, Paul Cizmas <[hidden email]> wrote:

Hello:

I am new to BIND and I am trying to install version 9.16.13 on a Mac OS X 10.13.6.

I downloaded version 9.16.13 and, following the suggestions from https://krypted.com/mac-os-x/dns-install-bind-macos/, I am trying to configure using

./configure --enable-symtable=none --infodir="/usr/share/info" --sysconfdir="/etc" --localstatedir="/var" --enable-atomic="no" --with-gssapi=yes --with-libxml2=no

This fails because of libuv

checking for pthread_set_name_np... no
checking for pthread_np.h... no
checking for libuv... checking for libuv >= 1.0.0... no
configure: error: libuv not found

I have libuv installed, however.  It is version 1.41.0.

I would appreciate any suggestions on how to fix this.

Thank you,
Paul


_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users


_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Ondřej Surý
$ brew info bind
bind: stable 9.16.13 (bottled), HEAD
Implementation of the DNS protocols
https://www.isc.org/bind/
Not installed
From: https://github.com/Homebrew/homebrew-core/blob/HEAD/Formula/bind.rb
License: MPL-2.0
==> Dependencies
Build: pkg-config ✔
Required: json-c ✔, libidn2 ✔, libuv ✔, openssl@1.1 ✔, python@3.9 ✔

Ondrej
--
Ondřej Surý (He/Him)
[hidden email]

> On 26. 3. 2021, at 15:02, Paul Cizmas <[hidden email]> wrote:
>
> Ondrej:
>
> I did not think of doing it.  Let me try.  Thank you for your suggestion!
>
> Paul
>
>> On Mar 26, 2021, at 2:04 AM, Ondřej Surý <[hidden email]> wrote:
>>
>> Paul,
>>
>> why don’t you just install BIND 9 from Homebrew?
>>
>> Ondřej
>> --
>> Ondřej Surý — ISC (He/Him)
>>
>> My working hours and your working hours may be different. Please do not feel obligated to reply outside your normal working hours.
>>
>>> On 26. 3. 2021, at 1:50, Paul Cizmas <[hidden email]> wrote:
>>>
>>> Hello:
>>>
>>> I am new to BIND and I am trying to install version 9.16.13 on a Mac OS X 10.13.6.
>>>
>>> I downloaded version 9.16.13 and, following the suggestions from https://krypted.com/mac-os-x/dns-install-bind-macos/, I am trying to configure using
>>>
>>> ./configure --enable-symtable=none --infodir="/usr/share/info" --sysconfdir="/etc" --localstatedir="/var" --enable-atomic="no" --with-gssapi=yes --with-libxml2=no
>>>
>>> This fails because of libuv
>>>
>>> checking for pthread_set_name_np... no
>>> checking for pthread_np.h... no
>>> checking for libuv... checking for libuv >= 1.0.0... no
>>> configure: error: libuv not found
>>>
>>> I have libuv installed, however.  It is version 1.41.0.
>>>
>>> I would appreciate any suggestions on how to fix this.
>>>
>>> Thank you,
>>> Paul
>>>
>>>
>>> _______________________________________________
>>> Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list
>>>
>>> ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.
>>>
>>>
>>> bind-users mailing list
>>> [hidden email]
>>> https://lists.isc.org/mailman/listinfo/bind-users
>

_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users

signature.asc (849 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Paul Cizmas
Ondrej:

Thank you - I installed bind with brew.  It says it installed 9.16.13.  However, it still seems that I am running 9.9.7-P3:

~$ sudo brew services start bind
Password:
warning: unable to access '/Users/cizmas/.config/git/attributes': Permission denied
warning: unable to access '/Users/cizmas/.config/git/attributes': Permission denied
warning: unable to access '/Users/cizmas/.config/git/attributes': Permission denied
warning: unable to access '/Users/cizmas/.config/git/attributes': Permission denied
==> Tapping homebrew/services
Cloning into '/usr/local/Homebrew/Library/Taps/homebrew/homebrew-services'...
remote: Enumerating objects: 20, done.
remote: Counting objects: 100% (20/20), done.
remote: Compressing objects: 100% (20/20), done.
remote: Total 1141 (delta 8), reused 0 (delta 0), pack-reused 1121
Receiving objects: 100% (1141/1141), 331.53 KiB | 3.38 MiB/s, done.
Resolving deltas: 100% (484/484), done.
warning: unable to access '/Users/cizmas/.config/git/attributes': Permission denied
Tapped 1 command (39 files, 417.3KB).
Warning: Taking root:admin ownership of some bind paths:
  /usr/local/Cellar/bind/9.16.13/sbin
  /usr/local/Cellar/bind/9.16.13/sbin/named
  /usr/local/opt/bind
  /usr/local/opt/bind/bin
  /usr/local/opt/bind/sbin
This will require manual removal of these paths using `sudo rm` on
brew upgrade/reinstall/uninstall.
==> Successfully started `bind` (label: homebrew.mxcl.bind)
~$ named -v
BIND 9.9.7-P3 (Extended Support Version)

So, why is it still 9.9.7-P3?

Thank you,
Paul


On Mar 26, 2021, at 9:25 AM, Ondřej Surý <[hidden email]> wrote:

$ brew info bind
bind: stable 9.16.13 (bottled), HEAD
Implementation of the DNS protocols
https://www.isc.org/bind/
Not installed
From: https://github.com/Homebrew/homebrew-core/blob/HEAD/Formula/bind.rb
License: MPL-2.0
==> Dependencies
Build: pkg-config ✔
Required: json-c ✔, libidn2 ✔, libuv ✔, openssl@1.1 ✔, python@3.9 ✔

Ondrej
--
Ondřej Surý (He/Him)
[hidden email]

On 26. 3. 2021, at 15:02, Paul Cizmas <[hidden email]> wrote:

Ondrej:

I did not think of doing it.  Let me try.  Thank you for your suggestion!

Paul

On Mar 26, 2021, at 2:04 AM, Ondřej Surý <[hidden email]> wrote:

Paul,

why don’t you just install BIND 9 from Homebrew?

Ondřej
--
Ondřej Surý — ISC (He/Him)

My working hours and your working hours may be different. Please do not feel obligated to reply outside your normal working hours.

On 26. 3. 2021, at 1:50, Paul Cizmas <[hidden email]> wrote:

Hello:

I am new to BIND and I am trying to install version 9.16.13 on a Mac OS X 10.13.6.

I downloaded version 9.16.13 and, following the suggestions from https://krypted.com/mac-os-x/dns-install-bind-macos/, I am trying to configure using

./configure --enable-symtable=none --infodir="/usr/share/info" --sysconfdir="/etc" --localstatedir="/var" --enable-atomic="no" --with-gssapi=yes --with-libxml2=no

This fails because of libuv

checking for pthread_set_name_np... no
checking for pthread_np.h... no
checking for libuv... checking for libuv >= 1.0.0... no
configure: error: libuv not found

I have libuv installed, however.  It is version 1.41.0.

I would appreciate any suggestions on how to fix this.

Thank you,
Paul


_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users




_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Bruce  Johnson


> On Mar 26, 2021, at 9:17 AM, Paul Cizmas <[hidden email]> wrote:
>
> Ondrej:
>
> Thank you - I installed bind with brew.  It says it installed 9.16.13.  However, it still seems that I am running 9.9.7-P3:

Make sure that the launchd plist for bind is pointing to the correct location of named. (probably /usr/local/opt/bind/sbin judging from the screen shot)

If the previous version was installed as part of Mac OS Server, or MacPorts, for example that binary will live somewhere other than /usr/local.

--
Bruce Johnson
University of Arizona
College of Pharmacy
Information Technology Group

Institutions do not have opinions, merely customs

_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Tony Finch
In reply to this post by Paul Cizmas
Paul Cizmas <[hidden email]> wrote:

> ~$ named -v
> BIND 9.9.7-P3 (Extended Support Version)

What's probably happening here is that the BIND on your $PATH isn't
necessarily the BIND that homebrew installed and (hopefully) is running.

You can run `dig @localhost version.bind ch txt` to see what the running
server reports as its version.

You can run `which named` to find out where it is finding 9.9.7.

If you run `rndc status` it should fail, because of the mismatched
installations (I expect your 9.9.7 will not look for the rndc key in the
same place as 9.16.3) but `/usr/local/opt/bind/sbin/rndc status` ought to
work and tell you about the running 9.16.3.

Tony.
--
f.anthony.n.finch  <[hidden email]>  https://dotat.at/
Great Orme Head to the Mull of Galloway: Southwest veering west 6 to
gale 8, backing southwest 5 to 7 later. Moderate, occasionally rough.
Squally showers, rain later. Good, occasionally moderate.

_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Paul Cizmas
Tony, thank you!  I ran 'dig @localhost version.bind ch txt’ and got

~$ dig @localhost version.bind ch txt
md5.c:96: fatal error: RUNTIME_CHECK(pk11_get_session(ctx, OP_DIGEST, 1, 0, 0, ((void *)0), 0) == 0) failed
Abort trap: 6

I do not know what this means.

I then ran 'which named’ and it is

/Applications/Server.app/Contents/ServerRoot/usr/sbin/named

When I ran rndc status I got

~$ rndc status
rndc: error: open: /Library/Server/named/rndc.key: permission denied
rndc: could not load rndc configuration

Thank you,
Paul

On Mar 26, 2021, at 1:44 PM, Tony Finch <[hidden email]> wrote:

Paul Cizmas <[hidden email]> wrote:

~$ named -v
BIND 9.9.7-P3 (Extended Support Version)

What's probably happening here is that the BIND on your $PATH isn't
necessarily the BIND that homebrew installed and (hopefully) is running.

You can run `dig @localhost version.bind ch txt` to see what the running
server reports as its version.

You can run `which named` to find out where it is finding 9.9.7.

If you run `rndc status` it should fail, because of the mismatched
installations (I expect your 9.9.7 will not look for the rndc key in the
same place as 9.16.3) but `/usr/local/opt/bind/sbin/rndc status` ought to
work and tell you about the running 9.16.3.

Tony.
--
f.anthony.n.finch  <[hidden email]>  https://urldefense.com/v3/__https://dotat.at/__;!!KwNVnqRv!X3SMvugQcNKGxCiqE5_jRKoYHw1W0s4vgKKIp5wzN-eZZHZJyrih8gMHTHqvak0$
Great Orme Head to the Mull of Galloway: Southwest veering west 6 to
gale 8, backing southwest 5 to 7 later. Moderate, occasionally rough.
Squally showers, rain later. Good, occasionally moderate.



_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Paul Cizmas
In reply to this post by Bruce Johnson
Bruce, indeed the named is in /Applications/Server.app/Contents/ServerRoot/usr/sbin/named.  

> On Mar 26, 2021, at 12:20 PM, Bruce Johnson <[hidden email]> wrote:
>
>
>
>> On Mar 26, 2021, at 9:17 AM, Paul Cizmas <[hidden email]> wrote:
>>
>> Ondrej:
>>
>> Thank you - I installed bind with brew.  It says it installed 9.16.13.  However, it still seems that I am running 9.9.7-P3:
>
> Make sure that the launchd plist for bind is pointing to the correct location of named. (probably /usr/local/opt/bind/sbin judging from the screen shot)

Indeed, named is in /usr/local/opt/bind/sbin.  How can I “make sure that the launchd plist” is pointing to /usr/local/opt/bind/sbin?
>
>
> If the previous version was installed as part of Mac OS Server, or MacPorts, for example that binary will live somewhere other than /usr/local.

Indeed again, the previous BIND, which is 9.9.7-P3, was installed as part of Mac OS Server.

Thank you, Paul
>
> --
> Bruce Johnson
> University of Arizona
> College of Pharmacy
> Information Technology Group
>
> Institutions do not have opinions, merely customs
>

_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

alcol alcol
In reply to this post by Paul Cizmas
seriously? is like linux/unix FAQ 😄






From: bind-users <[hidden email]> on behalf of Paul Cizmas <[hidden email]>
Sent: Friday, March 26, 2021 9:06 PM
To: Tony Finch <[hidden email]>
Cc: [hidden email] <[hidden email]>
Subject: Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure
 
Tony, thank you!  I ran 'dig @localhost version.bind ch txt’ and got

~$ dig @localhost version.bind ch txt
md5.c:96: fatal error: RUNTIME_CHECK(pk11_get_session(ctx, OP_DIGEST, 1, 0, 0, ((void *)0), 0) == 0) failed
Abort trap: 6

I do not know what this means.

I then ran 'which named’ and it is

/Applications/Server.app/Contents/ServerRoot/usr/sbin/named

When I ran rndc status I got

~$ rndc status
rndc: error: open: /Library/Server/named/rndc.key: permission denied
rndc: could not load rndc configuration

Thank you,
Paul

On Mar 26, 2021, at 1:44 PM, Tony Finch <[hidden email]> wrote:

Paul Cizmas <[hidden email]> wrote:

~$ named -v
BIND 9.9.7-P3 (Extended Support Version)

What's probably happening here is that the BIND on your $PATH isn't
necessarily the BIND that homebrew installed and (hopefully) is running.

You can run `dig @localhost version.bind ch txt` to see what the running
server reports as its version.

You can run `which named` to find out where it is finding 9.9.7.

If you run `rndc status` it should fail, because of the mismatched
installations (I expect your 9.9.7 will not look for the rndc key in the
same place as 9.16.3) but `/usr/local/opt/bind/sbin/rndc status` ought to
work and tell you about the running 9.16.3.

Tony.
--
f.anthony.n.finch  <[hidden email]>  https://urldefense.com/v3/__https://dotat.at/__;!!KwNVnqRv!X3SMvugQcNKGxCiqE5_jRKoYHw1W0s4vgKKIp5wzN-eZZHZJyrih8gMHTHqvak0$
Great Orme Head to the Mull of Galloway: Southwest veering west 6 to
gale 8, backing southwest 5 to 7 later. Moderate, occasionally rough.
Squally showers, rain later. Good, occasionally moderate.



_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Tony Finch
alcol alcol <[hidden email]> wrote:

> seriously? is like linux/unix FAQ 😄

Please, if you can't be helpful, don't reply at all. We all have to learn
somehow, and the best way to show your knowledge is to share it generously.

Tony.
--
f.anthony.n.finch  <[hidden email]>  https://dotat.at/
Trafalgar: Easterly 6 to gale 8 in southeast, otherwise mainly
northeasterly 4 to 6. Moderate or rough. Thundery showers. Good,
occasionally moderate.

_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

Bind-Users forum mailing list
Well said!


On Mon, 29 Mar 2021 16:11:54 +0100
Tony Finch <[hidden email]> wrote:

> alcol alcol <[hidden email]> wrote:
>
> > seriously? is like linux/unix FAQ 😄  
>
> Please, if you can't be helpful, don't reply at all. We all have to learn
> somehow, and the best way to show your knowledge is to share it generously.
>
> Tony.
_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
Reply | Threaded
Open this post in threaded view
|

Re: BIND 9.16.13 and Mac OS X 10.13.6 - problems with ./configure

@lbutlr
In reply to this post by alcol alcol
On 26 Mar 2021, at 14:32, alcol alcol <[hidden email]> wrote:
> seriously? is like linux/unix FAQ 😄

Oh, I would say learning how to post to mailing lists in linux/unix 101. Perhaps you could review that yourself and not send bloated messages full of HTML garbage?

--
"Are you pondering what I'm pondering?"
"Well, I think so, Brain, but snort no, no, it's too stupid!"

_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list

ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information.


bind-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/bind-users
12